I've begun working on my LP build. I'm using the Catto plan for this build.
I started off my jointing and gluing together the back (African mahogany) and the nicely figured flamed maple top. I had to thickness the mahogany a bit so I used a router and plane.
I started off my jointing and gluing together the back (African mahogany) and the nicely figured flamed maple top. I had to thickness the mahogany a bit so I used a router and plane.
I used my jig saw to roughly cut out the pieces and trued up the mahogany using my spindle sander. I'll trim the maple flush after gluing with my router.
I set up 2 temporary straight edges and then cut the wire channel. Then it was time to glue the maple top on. Hopefully I used enough clamps!
I set up 2 temporary straight edges and then cut the wire channel. Then it was time to glue the maple top on. Hopefully I used enough clamps!